Magnet synchronous machines (motors & generators)
Electronically commuted 3-phase motors (BLDC motors) are especially well suited for applications requiring quiet running characteristics and a long service life. The high-energy permanent magnets allow high acceleration rates, combined with very high efficiency and speeds of up to 12000 rpm (depends on the model). Our motors embed their Hall effect shaft sensors, for friendly use.
High speed geared
high efficiency
Low speed gearless
high torque
Embedded shaft position and torque sensor
The rotor position is fed back electronically by three Hall sensors offset by 120° (other rotor sensor technology is available on demand). Together with an encoder, BLDC motors can also be used in applications requiring precise positioning. Torque sensor is available in option.
These motors are suited for direct drive, geared or gearless operation. Removing gear saves dry & viscous losses. This allows high efficiency at low torque with high speed, while delivering high torque in all speed range.
Reverse generation is possible with excellent efficiency, due to low stator impedance.
Magnet synchronous machines (motors & generators)
Electronically commuted 3-phase motors (BLDC motors) are especially well suited for applications requiring quiet running characteristics and a long service life. The high-energy permanent magnets allow high acceleration rates, combined with very high efficiency and speeds of up to 12000 rpm (depends on the model). Our motors embed their Hall effect shaft sensors, for friendly use.
Magnet synchronous machines (motors & generators)
Electronically commuted 3-phase motors (BLDC motors) are especially well suited for applications requiring quiet running characteristics and a long service life. The high-energy permanent magnets allow high acceleration rates, combined with very high efficiency and speeds of up to 12000 rpm (depends on the model). Our motors embed their Hall effect shaft sensors, for friendly use.
Embedded shaft position and torque sensor
The rotor position is fed back electronically by three Hall sensors offset by 120° (other rotor sensor technology is available on demand). Together with an encoder, BLDC motors can also be used in applications requiring precise positioning. Torque sensor is available in option.
Innovative patented magnetic design
Special magnetic circuit design allows strip copper winding, and low cogging torque. This dramatically reduces stator phase resistance and allows ultra-low Joule losses.
All our motors accept an embedded control board, that is located into the motor. This feature dramatically improves electromagnetic behavior, because connections are very short.
This gives a robust, compact and efficient design
Motors alone | ||||
---|---|---|---|---|
Commercial docs Motor | Commercial doc LM Speed R74-x | DT21100-EN | Compact motor - geared applications | Up to 4Nm/kg |
Commercial doc LM Speed C137-x | DT21200-EN | Fast motor - geared applications | Up to 10kW/kg @ 12krpm | |
Commercial doc LM Speed D144-x | DT21300-EN | Drum motor - direct drive gearless | Up to 6kW/kg | |
Commercial doc LM Speed F276-x | DT21400-EN | Flat motor - direct drive gearless | Up to 9Nm/kg | |
Flyers Motors | Flyer LM Speed R74-x | DT22100-EN | ||
Flyer LM Speed C137-x | DT22200-EN | |||
Flyer LM Speed D144-x | DT22300-EN | |||
Flyer LM Speed D144-x-eMobility | DT22300-EN-eMobility | eMobility applications | Embedded eWheel apps | |
Flyer LM Speed F276-x | DT22400-EN | |||
Flyer LM Speed F276-x-eMobility | DT22400-EN-eMobility | eMobility applications | Embedded eWheel apps | |
Specs docs Motors | Spec doc LM Speed RS74-25 | DT25100-S-EN | Medium lenght 25mm iron | Medium speed Geared applications - 6krpm max |
Spec doc LM Speed RB74-38 | DT25100-M-EN | Medium lenght 38mm iron | ||
Spec doc LM Speed RB74-74 | DT25100-L-EN | Long lenght 74mm iron | ||
Spec doc LM Speed C137-76 | DT25200-S-EN | Medium lenght 76mm iron | Fast speed Geared applications - 12krpm max | |
Spec doc LM Speed C137-102 | DT25200-M-EN | Medium lenght 102mm iron | ||
Spec doc LM Speed C137-154 | DT25200-L-EN | Long lenght 154mm iron | ||
Spec doc LM Speed D144-25-Geared | DT25300-SG-EN | Medium lenght 25mm iron | embedded gearbox | |
Spec doc LM Speed D144-38 | DT25300-M-EN | Medium lenght 38mm iron | Direct drive eBike Wheel | |
Spec doc LM Speed D144-38-Geared | DT25300-MG-EN | Long lenght 38mm iron | embedded gearbox | |
Spec doc LM Speed D144-51 | DT25300-L-EN | Long lenght 51mm iron | Direct drive compatible - or geared applications | |
Spec doc LM Speed F276-12 | DT25400-S-EN | Medium lenght 12mm iron | eBike version 36V | |
Spec doc LM Speed F276-25 | DT25400-M-EN | Medium lenght 25mm iron | Mountain eBike version 36V | |
Spec doc LM Speed F276-38 | DT25400-L-EN | Long lenght 38mm iron | eScooter version 48V |